REMOTEMASTER LEARNING REMOTE
All buttons of Remotemaster remote control can be programmed twice.This means that, when using both programming levels, it is possible to replace two different remote controls totally.
The numeric keypad makes it possible to select channels directly with this and can handle teletext functions.
The most important attribute of Remotemaster remote is the possibility to program two different controlling levels A and B. In this case for example it is possible to program the function of the televison set to power button of level A and the function of the satellite receiver to level B. When now activating level A, the tv will react when pressing power button on remote. After selecting level B remote will switch on and off the satellite receiver by pressing power button.
If there will be a new device at your home it future, it is no problem to program the remote for your new device easily and quickly at any time.
- Universal remote control
- Learns all functions from the original remote - MUST HAVE THE ORIGINAL REMOTE TO COPY THE FUNCTIONS
- Including numeric keys for direct programm selection
- Each button can be programmed twice
- Large buttons
- Can be reporgrammed at any time
- Replaces all audio video brands
- No loss of settings when changing batteries
Press buttons 'Power TV' and 'Stop' t the same time.
Hold both of the keys for at least 5 seconds until the corresponding indicator A lights up.
The learning system is now on.
Hold the sending end of the established remote aiming at the receiving end of SeKi. (distance 2-5m)
Press the button of SeKi remote control you want to program. The indicator will flash 3 times.
Press the targeted button of the original remote control. When receiving the correct data, LED will light for 1 second and then flash 3 times.
To learn other buttons repeat steps 3 + 4 until the end of all learning.
When learning is completed, press 'Power TV' to exit learning state.
You are now done and can now use your SeKi